地址:廣州市番禺區鍾村街漢興三街6號3棟1913-1916
電話 :020-83602746
傳真 :020-83516516
本世紀初Merck Millipore 推出的Milli-Q™ Century 係列超純水係統受到用戶的廣泛好評 ,並被公認為實驗室超純水器的事
實標準。作為Century 係列的升級版 ,新一代Milli-Q™ Reference 係統 ,秉承一貫的優良品質 ,性能進一步提升 ,滿足更
多樣化的實驗室需求 。本係統從純水生產高品質的超純水 ,可以滿足您的各種應用需求 ,並且水質符合或超過您需遵循的
各種法規和標準要求 。
通過全新的純化策略 ,我們實現了所有這些目標 。經過第一步純化 ,純水的電阻率即達到18.2MΩ.cm(25℃下) ,且TOC
值低於5ppb 。產水經過一個小型的循環回路進入PODPak(終端精製器) 。不同的終端精製器可以滿足您不同的應用需
求。
低流速功能可對容量瓶中的彎液麵進行精確調節 。
長達75 cm 的水管可伸入清洗槽 ,方便清洗玻璃器皿 。
定量功能可自動取用您需要的水量 ,節省您的時間 ,人體工學設計的取水支架適用於各種高度和形狀的實驗室玻璃器皿 。
選用腳踏取水開關 ,解放您的雙手 ,為您帶來更多便利 。
漏水監測器─放置於地板上 ,如果地板上漏有水 ,此傳感器可停止係統進水 。即使用戶在往容器中注水時忘記停止取水 ,也不必擔心水會溢出
主機產出的超純水經過一個小型循環回路 ,到達Q-POD™ 取水器的出水口 。從Q-POD™ 出水口進行取水 。
將腳踏取水開關連接到Q-POD™ 的底座 ,或者直接將其連接到Milli-Q™ 係統 ,這樣在取水時可解放您的雙手 :踩下腳踏開關開始取水 ,再次踩下腳踏開關就能停止取水 。
維護更少 ,更簡單
您可以在5 分鍾內完成Q-Gard™ 預處理柱或Quantum™ 精製柱的更換 。耗材上的RFID 電子識別標簽 ,可自動在係統存儲器中注冊
新耗材的貨號和批號 ,讓您快速並輕鬆地實現可追溯性 。
更換POD 終端精製器所用的時間不超過2 分鍾 。
係統內置紫外燈的使用壽命延長至2 年 。
係統將會提前15 天提醒您更換耗材或者預約服務拜訪 ,從而確保您的用水不會中斷 。
服務
Merck Millipore 提供全套的維護項目 ,所有項目均由經Merck Millipore 認證和授權的服務工程師來完成 。專業的售後服務消除您所有
後顧之憂 。
Merck Millipore 提供全麵的驗證服務 ,幫助您符合各種法規的要求 。Merck Millipore 的服務項目涵蓋您所有的需求 ,例如安裝 、用戶培訓 、
技術支持 、故障排除 、預防性維護拜訪以及各種驗證服務 ,均在GXP 規範下通過專門的校準設備 、程序 、工作手冊和適用性測試來完成 。
上一條 : Milli-Q™ Advantage A10™ 超純水係統
下一條 :沒有了 !