地址:廣州市番禺區鍾村街漢興三街6號3棟1913-1916
電話 :020-83602746
傳真 :020-83516516
詳情介紹 :
Milli-Q™ Integral 係統提供緊湊型解決方案 ,使用一台獨立係統既可生產Ⅱ級(純)水並以此為水源生產Ⅰ級(超純)水
——從而無需額外的純水來源 。
雙重POD(供水點)概念
Milli-Q™ Integral 係統POD 取水器的設計目的是節約空間同時方便用戶的取水 。用戶根據實驗室的空間
特點選擇定製化的安裝方式 ,將Q-POD™ 超純水取水器和E-POD™ 純水取水器安放在所需位置 。此外
POD 裝置特別引入了符合人體工程學的設計 ,以適應最常用的實驗室玻璃器皿的形狀和高度 。每個係統最多可在實驗室裏
的不同位置安放三台獨立的POD 取水器 。根據專業需求選擇不同的Application Pak 係列精製器可在取水之前去除特定汙染
物 ,通用POD 取水器與之配套可適應多種實驗室應用 。
領先的Elix™ 純化技術
榮獲專利的Elix™ 模塊已成為生產II 級純水的新標準 ,並全麵取代實驗室的蒸餾和常規純水製備係統 。Elix™ Advantage 純
水係統用戶提供了下列好處 :持續穩定的優質純水 :
采用默克密理博專利的Elix™ 連續電流去離子技術 ,無需添加軟化劑 、化學再生或更換DI 柱即可穩定獲得5MΩ.cm(25
℃) 以上 ,TOC<30ppb 的II 級純水 。
獨特的陰極防結垢技術 :
專利的陰極活性炭防結垢技術能夠有效防止Elix 純化模塊堵塞並減少,因額外增加軟化步驟帶來的成本上升 。
低運行成本:在Elix™ EDI 組件中 ,經由弱電流持續再生的離子交換樹脂 ,確保恒定的優良水質 。這一低能耗工藝的棄水
少 ,可節約經RO 膜處理的純水和電力消耗 。Elix™ 模塊僅使用普通白熾燈所需的電能 。
無需維護 :
持續再生離子交換樹脂可消除危險化學品再生或昂貴的樹脂更換 。
Elix 模塊棄水口可選裝AIRGAP 組件 ,有效防止Elix 模塊微生物反向汙染 。
可滿足多種專業應用需求的專家級超純水
Milli-Q™ Integral 一體化係統可根據進水水質和產水應用選擇多種純化柱 ,不僅可提供電阻率為18.2 MΩ.cm(25 ℃) ,
TOC<5ppb 的基礎超純水 ,還可根據專業的水質需求提供適當的Application Pak 用水點精製器 ,Milli-Q™ Integral 係統所
提供的專家級超純水 ,可滿足HPLC 、LC-MS、MALDI-ToF-MS 、IC 、ICP 、AA 等理化分析應用領域和PCR 、凝膠電泳 、細
胞培養等生命科學領域以及眾多專業水質需求領域的極致用水需求 。
Application Pak 易於與POD 取水器連接 ,以使水質符合您的特定研究和應用要求 。例如 ,安裝在用水點的BioPak™ 超濾
器 ,可生產適合於基因組學應用(質量至少等同於DEPC 處理水)和細胞培養的超純水 。
輕鬆方便地供應純水和超純水
易於操作 ,能夠節約研究人員的寶貴時間 。使用E-POD™ 和Q-POD™ 取水器供應純水和超純水 ,簡單直觀 ,符合您的要
求 ,而不影響質量 。
Milli-Q™ Integral 係統可輕鬆滿足您的各種實驗室應用需求 。您可以根據自己每天的用水量選擇不同流量的純水係統以滿足
您的實驗室需求 。
需要時,每天可生產300L 以上的Ⅱ級(純)水並以高達2L/min 的流速生產Ⅰ級(超純)水 。
Q-POD™ 和E-POD™ 裝置可配合多種實驗室玻璃器皿的使用 。取水方法簡單直觀 ,易於操作 ,科學家可以選擇手動或定
量取水方式以節約寶
貴的時間 。
POD 裝置位於再循環回路上 ,與主機或回路上的前一個POD 裝置的距離不超過290 cm 。在每個裝置中 ,水通過一個80
cm 的回路再循環到
取水器出口 。
每個Q-POD™ 和E-POD™ 裝置均有彩色背光式顯示屏 ,用戶可據此隨時檢查係統運行狀態和水質 。
電阻率監控 ,高精度的離子濃度檢測
高精度的電阻率檢測 ,是確保高純水中離子汙染物維持在亞ppb 水平的關鍵 。Milli-Q™ Integral 係統的高精度電阻率檢測儀
具有以下特定功能和先進設計 ,可確保係統屏幕上顯示數值的準確性 。
• 同軸電極的專利設計 ,確保電極常數的穩定性。
• 流通式無死角設計確保檢測結果能夠準確反映水中實際的離子濃度 。
• 低電極常數(0.01 cm-1) 確保低離子汙染下的最佳檢測精度 ,符合ASTM® D 1125-95 (2009) 的要求 。
• 溫度靈敏度達到0.1 ℃ ,可準確顯示溫度補償的電阻率 , ASTM® D 1125-95(2009) 標準推薦 。
• 電阻率檢測異常時自動報警
• 設計允許按USP § 645 和EP(歐洲藥典)的要求,執行電阻率適應性測試 。
TOC 監測, 真正準確有效的有機物監控
通過檢測TOC 水平 ,用戶可查驗係統的有機汙染物去除過程是否符合技術規範 。
TOC 檢測儀使用0.5 ml 石英管來獲取超純水 。A10™ 紫外線燈打開時 ,有機化合物發生光催化氧化反應 。有機物氧化的最
終產物為二氧化碳 ,溶於水後導致電導率增加 。TOC 檢測儀中的鈦電極可對此該電導率的變化(溫度補償到25 ℃)進行持
續監測 ,通過一係列精確的算法確保完全氧化 ,並計算與該電導率變化相關的碳含量 。
A10™ TOC 檢測儀專利技術具有以下優點 :
• 氧化過程和電導率檢測在同一個石英管內進行 。最後 ,A10™ 檢測儀
會確認所有有機物均被氧化(終止反應) ,並給出精確 、可重現的
TOC 值 。
• 經外部校正的TOC 檢測儀(含證書) ,其檢測範圍為1 ~ 999 ppb 。
• 設計允許按USP § 643 和EP(歐洲藥典)的要求 ,執行TOC 適應性
測試
上一條 : Milli-Q Direct-Q 8 ,16純水/超純水係統
下一條 : Milli-Q™ Advantage A10™ 超純水係統